專利翻譯：機械相關詞匯（三）

cabin 客艙
cable bracket 電纜托架
cadmium bronze 鎘青銅
cage 保持架
calcium carbide 電石
calculated bending moment 計算彎矩
cam , cam mechanism 凸輪機構
cam block 滑塊
cam driver 鍘楔
cam profile 實際廓線
cam profile 凸輪廓線
cam with oscillating follower 擺動從動件凸輪機構
cam 凸輪
camber gauge 外傾測量器
camphor 樟腦
camsahft coping lathe 凸輪軸仿形車床
camshaft grinding machine 凸輪軸磨床
camshaft polishing machine 凸輪軸超精磨機床
camshaft polishing machine 凸輪軸拋光機床
camshaft(journal )turning lathe 凸輪軸（軸頸）車床
cantilever beam 懸臂梁
cantilever structure 懸臂結構
capability 能力
car row 車列
car stand (jack stand) 汽車架
carbide to water generator 投入式乙發生器
carbon arc welding 碳弧焊
carbon electrode 碳極
carbon fouling （火花塞）積碳
carbon structureal steel 普通碳素結構鋼
carbon tool steel 碳素工具鋼
carbon-fiber reinforced plastics 碳纖維增強塑料
carbonitriding (cyaniding) 碳氮共滲（氰化）
carbonization 碳化
carburetor icing 化油器結冰
carburizing alloy steel 滲碳合金鋼
carburizing carbon steel 滲碳碳素鋼
carburizing furnace 滲碳爐
carburizing 滲碳
card of goods 貨卡
carriage 車廂
Cartesian coordinate manipulator 直角坐標操作器
carton box 紙箱
carton 紙箱
cascade speed control 串級調速
case-based design,CBD 基于實例設計
cash fare 普通票
casing head gasoline 氣體汽油
cast bronze 鍛造青銅
cast iron 鑄鐵
cast steel 鑄鋼
catalog 目錄
cathode shiedl 陰極罩
catholyte 陰極電解液
cating machine 澆注機
cation electrophoretic coating 陽離子型電泳涂料
cause analysis 原因分析
cause description 原因說明
cavitation 穴蝕
cellophane 賽璐酚
celluloid 賽璐珞
cellulose acetate 醋酸纖維（脂）
cement gum 膠泥
cementite 滲碳體
center distance change 中心距變動
center distance 中心距
center of mass 質心
center of pressure 壓力中心
centerless grinding 無心磨削
central gear 中心輪
centralized transportation 集中運輸
centrifugal force 離心力
centrifugal force 向心力
centrifugal seal 離心密封
centrifugal stress 離心應力
cetane number 十六烷值
chain dotted line 點劃線
chain gearing 鏈傳動裝置
chain 鏈
chain 鏈條
chain 鏈條槽
chamfer 倒角
chamois 麂皮
change gear change wheel 變速齒輪
character die 字模
characteristics 特性
chartered vehicle 包車
chassis dynamometer 底盤測功機
chassis lubricator 底盤潤滑機
chassis 底座
chassis 基座
check nut 鎖緊螺母
checked by 初審
check-up 技術檢查
chemical -heat treatment 化學熱處理
chemical mechanical working 化學機械加工
chemical vaporous depositon 化學氣相沉積法
chemical wear 化學磨損
chilled cast rion 冷激鑄鐵
chloroprene rubber 氯丁橡膠
Chromate 鉻酸處理
chrome bronze 鉻青銅
chromel 鉻鎳合金
chuck for grinding hole and end face of bevel gear 磨圓錐齒輪孔和端面用的卡盤
circuit breaker cabinet 斷路器柜
circular bending die 壓圓模
circular gear 圓形齒輪
circular pitch 齒距
circular pitch; pitch of teeth 節距
circular thickness 圓弧齒厚
circulating power load 循環功率流
circulation 周轉
city monthly ticket 市區月票
city passenger flow 市區客流
city transposrtation 市區運輸
class of vehicle maintenance 汽車維護類別
class of vehicle repair 汽車修理類別
classification of standards document. 標準文獻分類
classification 整理
cleaner 清洗劑
cleaning cloth 抹布
cleanness 清掃
clearance 徑向間隙
clockwise 順時針
clogged filter 濾清器阻塞
close type socket joint 封閉式插接
closed chain mechanism 閉鏈機構
closed kinematic chain 閉式鏈
cloud point 濁點
club car 高爾夫球車
clutch explosion 離合器炸裂
clutch 離合器
coarse thread 粗牙螺紋
coating for protection against corrosion 防腐鍍層
code fo practice 實施規則
coefficient of availability of vehicle 車輛完好率
coefficient of friction 摩擦系數
coefficient of speed fluctuation 機械運轉不均勻系數
coefficient of speed fluctuation 速度不均勻 ( 波動 ) 系數
coefficient of travel speed variation 行程速度變化系數
coefficient of utilization of automobile 出車率
coefficient of utilization of ton-kilometers 噸公里利用系數
coefficient of velocity fluctuation 運轉不均勻系數
coil stock 卷料
coincident points 重合點
coining press 精壓機
coke-fired furnace 焦碳爐
cold brittleness 冷脆性
cold draw 冷拉
cold drawing low carbon seamless steel tube 冷拔低碳無縫鋼管
cold drawing spring steel 冷拉彈簧鋼
cold extruding 冷擠壓
cold forging die 冷鍛模
cold forging 冷鍛
cold pressure welding 冷壓焊
cold rinse bank 冷水槽
cold rolled thin steel sheet 冷軋薄鋼板
cold rolling killed steel sheet 鎮靜鋼冷軋鋼板
cold rolling rimmed steel sheet 沸騰鋼冷釓鋼板
cold running-in 冷磨合
cold slug 冷塊
cold treatment 冷處理
cold trim 冷切邊
collapse of piston skirt 活塞裙部擠扁
collection of standard decumnets 標準文獻收集
combination in parallel 并聯式組合
combination in series 串聯式組合
combinaton pliers 鯉魚鉗
combined efficiency; overall efficiency 總效率
combined mechanism 組合機構
combined stress 復合應力
combusion teste 燃燒分析儀
combustion teste 燃燒（廢氣）分析儀
commercial bronze 工業用銅
common apex of cone 錐頂
common equipment 常用設備
common goods 普通貨物
common normal line 公法線
commuter 月票乘客
company standard(enterprise standard) 企業標準
comparable standard 可比標準
compensation fare 補票
compensation 補償
complementary standard 補充性標準
complete annealing 完全退火
complete failure 完全故障
complete penetration 焊透
complex mechanism 復雜機構
complex steel sheet with chromate zinc 鉻酸鋅復合鋼板
composite tooth form 組合齒形
compound (or combined) gear train 復合輪系
compound combining 復合式組合
compound die 合模
compound flat belt 復合平帶
compound gear train 混合輪系
compound hinge 復合鉸鏈
Compound screw mechanism 復式螺旋機構
compressed gas 壓縮煤氣
compression strength 抗壓強度
compressive stress 壓應力
compresson coil spring 壓縮螺旋彈簧
compressor oil 壓縮機機油
compressor 壓縮機
computer aided design, CAD 計算機輔助設計
computer aided manufacturing, CAM 計算機輔助制造
computer integrated manufacturing system, CIMS 計算機集成制造系統
concave 凸
concavity 凹面、凹度
Conceal Install 暗裝
concept design, CD 方案設計、概念設計
conclusion 結論
concurred design, CD 并行設計
concurrent engineering 并行工程
condenser tester 電容器試驗器
condition of self-locking 自鎖條件
conduction of heat 導熱性
cone angle 圓錐角
cone distance 錐距
cone-worm milling machine 球面蝸桿銑床
conical roller bearing 圓錐形滾子軸承
conical spring 錐形彈簧
conjugate cam 共軛凸輪
conjugate profiles 共軛齒廓
conjugate yoke radial cam 等徑凸輪
connecting rod alignment fixture 連桿矯正器
connecting rod, coupler 連桿
connection box 接線盒
connection test 檢查接線
conoid helical-coil compression spring 圓錐螺旋扭轉彈簧
conservation 清潔
constantan 康銅
constant-breadth cam 等寬凸輪
constant-velocity (or double) universal joint 雙萬向聯軸節
constitution of mechanism 機構組成
constitution of standard 標準的構成
constraining force 約束反力
constraint condition 約束條件
constraint 約束
consumption 消耗
contact points 嚙合點
contact ratio 重合度
contact seal 接觸式密封
contact stress 接觸應力
container transport 集裝箱運輸
content of normative document 標準文件的內容
content 目次
continous furnace 連續爐
continuous broaching 連續拉削
control center 調度中心
control panel 控制屏
control station 調度站
Control switches 控制開關
conventional mechanism; mechanism in common use 常用機構
convex roller 球面滾子
convex 凹
convex 凸的，凸面體
Conveyer 流水線物料板
coolant 冷卻液
coordinate frame 坐標系
coordinate 座標
Copper core power cable 銅芯電力電纜
copper 紫銅
copy grinding mahcine 靠模磨床
copy lathe 仿形車床
cork 軟木
correcting plane 平衡平面
correcting plane 校正平面
corrigenda 勘誤表
corrosion inhibitor 搞腐蝕劑
corrosion resistance 耐腐蝕性
corrosion resisting cast iron 耐蝕鑄鐵
corrosion wear 腐蝕性磨損
cosine acceleration (or simple harmonic) motion 余弦加速度運動
cosmetic defect 外觀不良
cosmetic inspect 外觀檢查
cost of labor 人工費
cost 成本
coulometer 庫侖計
counter sinking 锪孔
counterclockwise (or anticlockwise) 逆時針
counterweight 平衡重
couple 力偶
coupler-curve 連桿曲線
coupling shaft coupling 聯軸器
cover plate 蓋板
covered arc welding 手工電弧焊
covering power 深鍍能力
crank angle between extreme (or limiting) positions 極位夾角
crank arm, planet carrier 系桿
crank press 曲軸壓力機
crank shaft 曲柄軸
crank shaft 曲軸
crank shaper (guide-bar) mechanism 曲柄導桿機構
crank 曲柄
crank-rocker mechanism 曲柄搖桿機構
cranksahft journal grinding machine 曲軸主軸頸磨床
crankshaft (main journal turning lathe) 曲軸（主軸頸）車床
crankshaft dynamic balancing machine 曲軸動平衡機
crankshaft grinding machine 曲軸磨床
crankshaft journal face hardening machine 曲軸軸頸表面淬火機床
crankshaft journal milling machine 曲軸軸頸銑削專用機床
crankshaft polishing machine 曲軸軸頸拋光機床
crankshaft superfinishing machine 曲軸超精磨機床
crankshaft turning lathe 曲軸車床
creation design 創新設計
crepon finish 皺紋漆
crimp paper 瓦楞紙
critical defect 極嚴重缺陷
critical failure 致命故障
critical point 臨界點
critical speed 臨界轉速
cross grinding 端面磨削
cross weld 橫向焊縫
cross-belt drive 交叉帶傳動
crossed helical gears 交錯軸斜齒輪
crossover 交叉器
cross-shaped joint 十字接頭
crown gear 冠輪
crown shaving 剃鼓形齒
crusher 破碎機
cryptometer 遮蓋力測定儀
crystallization point 結晶溫度
CSBS yearbook 中國標準化年鑒
cst bimetal 鑄造雙金屬
culture 教養
cupola (cupola furnace) 沖天爐
curb window 安全監視窗
curling 卷邊
Current by Phase 每相電流
current repair of vehicle 汽車小修
curvature 曲率
curve matching 曲線拼接
curved-shoe follower 曲面從動件
curve-tooth bevel gear milling machine 弧齒錐齒輪銑齒機
curve-tooth bevel gear milling 弧齒錐齒輪銑刀盤刃
curvilinear motion 曲線運動
cushion 緩沖
cut-off (shear-out) 切口
cutter grinding machine 工具磨床
cutter 刀具
cutting machine 切割機
cutting-out press 切斷壓力機
cyaniding 氰化
cycle of motion 運動周期
cycle 周波
cycloidal gear 擺線齒輪
cycloidal motion 擺線運動規律
cycloidal tooth profile 擺線齒形
cycloidal-pin wheel 擺線針輪
cylinder block broaching machine 氣缸體專用拉床
cylinder block side broaching machine 氣缸體側拉床
cylinder boring machine 鏜缸機
cylinder compression gauge 氣缸壓力表
cylinder honing machine 氣缸珩磨機
cylinder leak tester 氣缸漏氣率檢驗儀
cylinder perpendicularity gauge 氣缸孔垂直檢驗儀
cylinder pressure gauge 氣缸壓力表
cylinder score 拉缸
cylinder sticking 咬缸
cylindric pair 圓柱副
cylindrical cam 圓柱凸輪
cylindrical coordinate manipulator 圓柱坐標操作器
cylindrical grinding 外圓磨削
cylindrical roller bearing 圓柱滾子軸承
cylindrical roller 圓柱滾子
cylindrical worm 圓柱蝸桿
cylindroid helical-coil compression spring 圓柱螺旋壓縮彈簧
cylindroid helical-coil extension spring 圓柱螺旋拉伸彈簧
cylindroid helical-coil torsion spring 圓柱螺旋扭轉彈簧
D.C traction substation 直流牽引變電站
D.I. rinse 純水次
daily sevice 每日保養
damage 損壞
date of standard implementation 標準實施日期
dated reference (to standards) 注明日期的引用（標準）
day and night line 晝夜線路
day and night vehicle 晝夜車
dead point 死點
deadener 防聲膠
decantation 沉淀法
decelerated run 壓點
decentralized transportation 分散運輸
decision items 決議事項
decoiling unit 開卷機
dedendum circle 齒根圓
dedendum 齒根高
deemed-to-satisfy provision 認為滿足規定
deep drawing sheet 深沖壓用薄鋼板
deep drawng 拉伸
deep groove ball bearing 深溝球軸承
deep hole working 深孔加工
deep penetration electrode 深熔焊條
deep penetration welding 深溶焊
defect 缺陷
defective product box 不良品箱
defective product label 不良標簽
defective product/non-good parts 不良品
defective products 不良品
defective products, not up-to-grade products 不良品
defective shock absorber 減震器失效
defective to staking 鉚合不良
defective upsiding down 抽芽不良
defective vacuum advance 真空提前失效
deficient manufacturing procedur 制造過程不良

想要查看全部?jī)?nèi)容，點擊下載專利翻譯：機械相關詞匯